На главную
Результаты поиска “Lathe stand plans free”
Lathe Stand Mobile Workstation | DIY Woodworking Strorage
 
09:46
Build a wood lathe stand for your mini or midi lathe with a beefy bench top and TONS of storage for hardware, tools and blanks BLOG: http://fixthisbuildthat.com/diy-wood-lathe-stand-plans PLANS: https://gum.co/lathestand Project in partnership with JET Woodworking: http://jettools.com ======= Join the Builder Club on Patreon and get Free Plans! https://www.patreon.com/fixthisbuildthat ======= SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 ======= Tools/Supplies Used (affiliate): JET 1221VS Lathe - http://amzn.to/2sNZVW5 JET Parallel Clamps - http://amzn.to/2sGwFyq Pocket hole jig - http://amzn.to/1KPqbDa Concealed Hinge Jig - http://amzn.to/2sXJ2Ja Circular Saw - http://amzn.to/1YP9Qli Tablesaw - http://amzn.to/2prd9nA Miter Saw - http://amzn.to/2oBR6ea Random Orbital Sander - http://amzn.to/2ssLsOV Cordless Drill - http://amzn.to/2tLIVgD Router - http://amzn.to/1PtJLXD 18" Drawer Slides - http://amzn.to/2sR78G2 Full Overlay Euro Hinge - http://amzn.to/2sRcalx 3" Locking Casters - http://amzn.to/2syzNMN Waterbase Polyurethane - http://amzn.to/2nnstDd Worktunes Earmuffs - http://amzn.to/2o2ZAtk Glue bottle - http://amzn.to/2g67duY Silicone glue brush - http://amzn.to/2grpjM0 Respirator - http://amzn.to/2q8lNXt ======= FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht ======= Brad Rodriguez PO Box 680433 Franklin, TN 37068
Просмотров: 43006 Fix This Build That
Build a Midi Lathe Stand
 
08:58
A good lathe stand is heavy, doesn't get in your way and has storage for all the stuff you use at the lathe. I haven't included storage for the lathe cutting tools since I would rather have those up higher. I did put a 45 degree on the top edge of the panel on the front if I change my mind and want to hang a rack on the front. I haven't included plans because the construction is fairly straightforward and you are going to want to adjust the height of the stand for your own height. The lathe spindle should be at about the same height as your elbow.
Просмотров: 30327 krtwood
Building the Lathe Stand/Workbench
 
18:28
Support me here: https://www.patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist:https://www.amazon.de/gp/registry/wishlist/2CHXL814961N7/ref=nav_wishlist_lists_2 Follow me on Instagram: https://instagram.com/marius.hornberger/ Video of the drawers: coming soon! My dad and I bought a metal working lathe. It weighs about 180kg and needed a good stand that could handle the weight and the vibration from the machine. The one we could have bought was about 400€ more...and made from sheet metal. No option for me, so I built this cabinet stand instead. Solid beech hardwood, birch plywood panels, and everything joined with mortise and tenon joints. There's no metal fastener in the basic structure. The cabinet itself now also weighs about 100kg, but that's good for the application. This stand could also be used as a regular workbench with lots of storage. I think I build another one someday for my workshop. Would you be interested in plans? Let me know. Now the lathe is a Optimum brand. We haven't used it very much yet, so keep that in mind if you ask questions about it. I can't give a review on it and I also don't want to as this is not what my channel is about. And because I know it's a hot topic and I don't want to answer the same question over and over again. The lathe was about 3200€ (without tools or accessories) Interested in a Pantorouter: How it works and where to get one: http://www.hybridpantorouter.jp/ For the US: http://hybridpantorouter.com also because it has been asked very often, the link to the diamond saw blade I used (it's expensive): http://de.feldershop.com/Saegen/Kreissaegeblaetter/Das-Diamant-Universalsaegeblatt-der-Extraklasse.html Enjoy the video!
Просмотров: 209704 Marius Hornberger
Building a stand for my lathe
 
03:56
This is how I built a custom lathe stand out of some spruce beams. I originally made some plans in sketchup, so that way I was able to cut the exact angles for the legs as shown in the plans. The joints did not end up as perfect as I wanted them to be, but having in mind that this was my first attempt in this size of a joinery-project, I am pretty confident with the result. Music: Roman Kouder - Cue 1
Просмотров: 4444 Tinyhouseueberaus
Build a homemade stand for a mini/midi/full size lathe (using Kreg Foreman Pocket Hole Machine)
 
05:48
SUBSCRIBE (FREE) TO STUMPY NUBS WOODWORKING JOURNAL►http://www.stumpynubs.com SUBSCRIBE TO YOUTUBE CHANNEL►https://www.youtube.com/user/StumpyNubsWorkshop YOUTUBE SUBSCRIBE►https://www.youtube.com/user/StumpyNubsWorkshop
Просмотров: 29449 Stumpy Nubs
Spanning beam metal lathe stand
 
13:27
Easy DIY project. More info here: http://users.tpg.com.au/agnet/cq9325rev4.html Camera: Nikon Coolpix L820
Просмотров: 8867 xynudu
Making a Lathe Stand | #Reclaimed | How To
 
05:04
Thank you for supporting me and my channel on Patreon! http://patreon.com/LiveFreeandDIY What I Used: Reclaimed 1/2" Plywood 2" x 10" Boards Circular Saw (Hitachi 7 1/4") - http://amzn.to/2jYoSu3 Thickness Planer (Porter Cable 12") - http://amzn.to/2j0vVTy Dowel Jig - http://amzn.to/2knAozZ CLAMPS! Router (DeWalt 618) - http://amzn.to/2jYgc78 Wood Glue Screws Handsaw Reciprocal Saw (DeWalt) - http://amzn.to/2jasBQR Casters - From Harbor Freight Leftover Paint Excelsior Mini Lathe - http://www.rockler.com/excelsior-mini-lathe Subscribe to my channel: http://bit.ly/LiveFreeandDIY Projects, Posts, Contact, Newletter http://LiveFreeandDIY.tv FOLLOW ME: https://instagram.com/LiveFreeandDIY https://twitter.com/LiveFreeandDIY https://www.facebook.com/LiveFreeandDIY MUSIC: Rock Angel by Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library https://youtu.be/K8eRXvLL7Wo
Просмотров: 1417 Live Free and DIY
How To Build A DIY Lathe Stand | Crafted Workshop
 
07:50
Build Article w/ cutlist, cut diagram, SketchUp file & more: http://craftedworkshop.com/build-meta... In this video, I’m building a metal lathe stand for my new Precision Matthews PM-1022V. This lathe stand is constructed almost completely from ¾” plywood with some hardwood trim. Enjoy the build! Tools Used in Lathe Stand Build: The links below are affiliate links. They cost you nothing and really help support Crafted Magazine’s projects. Thanks for your help! DEWALT DWE7491RS 10-Inch Jobsite Table Saw : http://amzn.to/1SDzgyd DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw : http://amzn.to/1VET36b DEWALT DCK290L2 20-Volt MAX Li-Ion 3.0 Ah Hammer Drill and Impact Driver Combo Kit : http://amzn.to/1pPNh3t Micro Jig GR-100 GRR-Ripper : http://amzn.to/1SDA5ac Oneida Air Steel Dust Deputy Deluxe Kit : http://amzn.to/1QFLx2J Oneida Air Molded Mini Gorilla HEPA Dust Collector : http://bit.ly/oneidaair FastCap Glu-Bot Glue Bottle : http://amzn.to/1SDAt8y Bessey K Body REVO Fixed Jaw Parallel Clamp Kit : http://amzn.to/2134W4X HNT Gordon Block Plane : http://bit.ly/hntgordon RIDGID 18-Gauge 2-1/8 in. Brushless Brad Nailer ► SUBSCRIBE : https://www.youtube.com/subscription_... ► SUPPORT US : https://www.youtube.com/channel/UC-hTi9atsD6wAl2s46LpAVw/sponsor ► FOLLOW CRAFTED MAGAZINE! FACEBOOK: http://facebook.com/craftedworkshop TWITTER: http://twitter.com/craftedworkshop INSTAGRAM: http://instagram.com/craftedworkshop Copyright Crafted Workshop 2016
Просмотров: 13087 Crafted Workshop
Building A Lathe Stand / T-Shirts
 
09:50
00:03 I skipped the bit about cutting the pieces or making the loose tenons instead starting with routering a channel for the side panels. 01:00 Dry fitting the side panels. 01:30 Gluing the side panels. 02:19 I am going to secure the side panels to a base piece using carriage screws which I am cutting out. 02:51 Pocket screwing the base, which will be strengthen with a panel glued on top. 03:34 Attaching the bottom section to side panels. 04:23 Cutting sheet material for base and installing. 05:02 Making top section – back angle of stand is 10 degrees. 05:18 I decided to use my V-nail gun to attach the top pieces together. I didn’t have a piece long enough so I also joined these together - trying to use all the scrap from around the workshop. 05:56 Fitting top to side panels. 06:10 I didn’t plane any timber down instead selecting the straightest pieces I could fine and orienting them to they would compensate for any slight warping. 06:30 Top sheet material. 07:01 Routering groove for back panel to slot into. 07:53 Cannibalising the workshop for material. 08:18 The glorious moment it all came together. 08:37 CONCLUSION 08:85 T-Shirts 09:20 But which one? 09:22 Disclaimer from the thumber. I'll provide a sketch up model with the next video. Subscribe Here: https://goo.gl/u1jZSq T-Shirts: https://shop.spreadshirt.co.uk/miscpro Instagram: http://instagram.com/savvas_papasavva Twitter: http://twitter.com/savvasPapasavva New Channel: http://youtube.com/EducatingSavvas Website: http://www.miscpro.com
Просмотров: 32974 Savvas Papasavva
Quick and Easy Tool Bench that flips! (How to Make)
 
08:07
Need more space in your woodworking shop? This tool bench has a top that flips and enough space to have access to 3 tools easily and be able to wheel it off in the corner when not it use. Free Flip Cart Plans - http://www.izzyswan.com/product/free-plans-flip-bench/ Website - http://www.izzyswan.com/ Instagram- https://www.instagram.com/izzyswan_woodworking/ Affiliate - Funny T-shirt - http://amzn.to/2gfNp9J Speed C - Clamps - http://amzn.to/2geSLT6 Palm drill Driver - http://amzn.to/2fOiwel -~-~~-~~~-~~-~- Please watch: "Extreme woodworking with limited tools | Izzy Swan" https://www.youtube.com/watch?v=eppMoEtGQPs -~-~~-~~~-~~-~-
Просмотров: 151050 izzy swan
DIY Projects - Mini Cannon + Giveaway
 
03:26
Free giveaway here - http://inspiretomake.com/page/giveaway/ Subscribe: http://bit.ly/1IYsymA Store: http://shop.inspiretomake.com Next video: https://www.youtube.com/watch?v=6NZSJsaNapY Music: B.Visible https://www.facebook.com/bvsbl https://soundcloud.com/b-vsbl/pad-feed List of tools I was using for this project: Mini Lathe - http://amzn.to/1L2NaJ2 Drill Bits - http://amzn.to/1eMQVWK Cutting Oil - http://amzn.to/1LWiquc Hole saw - http://amzn.to/1eMRHTC Super Glue Gel - http://amzn.to/1CuNW02 Pull saw - Drill - Sanding Paper - Spring Clamps - Anvil -
Просмотров: 195267 Inspire To Make
Homemade VERTICAL wood lathe PART 2 - Steel base and assembly
 
10:20
DIY, Homemade Vertical wood lathe part 2 - i had a base that was almost scraped from a machine we parted out and it looks like it will be a perfect fit my vertical lathe. i had to rill and tap a few holes and plasma cut a large hole to allow the gearbox to poke through the base and engage my ring gear on the slewing bearing. Are you planning on building a homemade lathe? I have built a few but they were quite technical. i thought it would be interesting to build a lathe where the turning axis is oriented in the vertical plane. the idea initially was suggested by a member of the homemade lathe facebook group (link below). the vertical lathe has been around since the industrial revolution and in fact we have one in our machine shop. however i have never seen one built for wood turning.... until now. i have no idea if this is going to work but since i had the parts already in my shop, i decided to go ahead and build one! the parts are simple: 1- slewing bearing - eBay for 125.00 1- Cadillac ring gear - eBay for 15.00 1- Spur Gear - McMaster Carr for 30.00 1- 1:1 gearbox - eBay for 100.00 4- heavy duty swivel feet - FREE! laying around the shop 1- Heavy duty steel base - FREE! SAVED FROM THE SCRAP PILE obviously the little lathe will be for woodturning and wood turning only. i would not attempt to turn anything other than wood on this "little" lathe. #homemadelathe #lathe #woodlathe #woodturning #verticallathe if you are interested in homemade lathes, please visit our facebook group https://www.facebook.com/groups/homemadelathe/
Просмотров: 3529 Ray MAKES
Building an Ultimate Lathe Stand
 
34:21
Building an ultimate stand for a midi woodworking lathe. Inspired by Mike Levy: https://www.youtube.com/watch?v=WkX2-0PP3Jg
Просмотров: 6710 On The Workbench
Lathe Tool Stand
 
06:19
I needed a mobile cart for my lathe chisels/gouges, so that I could start turning again. TOOLS USED Freud Heavy Duty Rip Blade https://amzn.to/2HUx734 Freud 1/2" spiral upcut https://amzn.to/2FKyH5y Freud Dado Stack https://amzn.to/2wkrl9o Glubot https://amzn.to/2KCSAiE Laguna Bandsaw https://amzn.to/2FMQ7yq Other tools I use and recommend https://www.amazon.com/shop/pauljenkins Want a Wood Knight tshirt? https://thewoodknight.threadless.com VLOG https://www.youtube.com/channel/UCKlaC9gTohR6xPKdblNFY3A SOCIAL https://instagram.com/thewoodknight/ https://twitter.com/thewoodknight https://www.facebook.com/TheWoodKnight
Просмотров: 3664 Paul Jenkins
022. How to Build A Lathe Mostly from Wood. Part 1 Intro, And The Plans
 
09:11
I describe some of the design ideas that went into this lathe, and what this series will be about. More details will be added as the series continues. The Lathe Series playlist https://www.youtube.com/playlist?list=PL4njCTv7IRbzJJOFyQP5qsd_uuR6zTfS7 The plans consist of a detailed drawing of each part, all the accessories we make in the video series, and many photos of the build process. The plans have both ANSI and Metric dimensions. http://jeremyfielding.com/lathe-plans-and-information.html If you want to support this channel or just see more content from me for free please visit my patreon page. https://www.patreon.com/jeremyfieldingsr Products I use in this project. T-Track from amazon. https://www.amazon.com/gp/product/B0000DD1O9/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0000DD1O9&linkCode=as2&tag=jerem01f-20&linkId=c2a2d3f249eaf577adad4cdf436adc21 The lathe Chuck http://amzn.to/2nzXRym Adapter Socket- Morse MT2 taper http://amzn.to/2odynXJ music "Carefree" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/
Просмотров: 21430 Jeremy Fielding
Make an Industrial Drawer Cabinet - Forme Industrious
 
14:50
Industrial Styled workshop Drawers/ Lathe Cabinet. Made from 75 x 75 mm Steel for the 4 legs, 50 x 50 for the rest of the box structure. I have a heap of 19mm reclaimed plywood so I used that for the top, sides and drawer cases. The Drawer front is reclaimed Pine shelving. I made the drawer bases from old metal signage as I have so many sheets I have to use it some how, rather than buy more ply. (Ply, would be my first preference however). As the Ply was all painted with an industrial finish (Grey) I paint stripped and sanded the paint off, then stained in Walnut. Clear Wipe on Poly and Bee's Wax is used to finish. I made the Drawer runners also to cut down on costs though I would much prefer to use the sliding drawers runners. If this was being built for a customer I would use the roller bearing sliders for the drawers. The Drawer Handles are made from ReBar and Angle. No welding. I machined a slight shoulder on the Rebar ends so once installed that cannot slide out. I love it..........I love it. Oh, it is heavy as all hell too. Music - You Tube free Bird Creek - Climbing Bird Creek - Surfing Llama If you would like to help me you can contribute at the link below :) https://www.patreon.com/FormeIndustrious Regards Scott
Просмотров: 740086 Scott Turner
Building a lathe stand for my Grizzly mini lathe
 
10:23
I build a new stand to set my Grizzly mini lathe on. It was sitting on a wobbly tool box before.
Просмотров: 8556 MyRobertadams
094 - Lathe Bench with storage
 
08:06
We bought an extension bed for our mini lathe to make chair legs with, so we needed to build a new lathe bench with integrated storage for tools Download the free plans: http://thewoodknight.com/downloads/lathe-bench-with-storage Sponsored by IWoodLike http://iwoodlike.com --- Follow me on Twitter https://twitter.com/vikingcode Facebook https://www.facebook.com/TheWoodKnight Website http://thewoodknight.com/ Instagram https://instagram.com/thewoodknight/ Support me and free woodworking content at https://www.patreon.com/thewoodknight
Просмотров: 7834 Paul Jenkins
Miter Saw Station // Woodworking How To
 
10:17
See how I made a simple miter saw station! Sponsored Promo Code: “make” for $50 off a premium mattress: http://www.casper.com/make Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com In my old shop, I never really had room for a proper miter station. I dealt with it but also ways to move things out of the way to cut an 8' piece of material and come up with creative (and some times dangerous) stop block situations. In the new shop, I have plenty of space, so it was time to make a dedicated place to use the miter saw. I didn't want to go overboard with storage or complexity and wanted it to still be relatively compact. I also had 2 days to build it in between projects, so it had to be simple.The only real requirements for me were that it had to be cheap, easy, fast and it needed a sliding stop block system. I think I hit all of those points while still getting a solid work surface that has PLENTY of space for future improvement in the form of storage. There is space above and below to add storage and the simply dust collection ports help keep the whole area clean. Check it out, and if you want to build you own, click below GET DIGITAL PLANS https://www.iliketomakestuff.com/product/miter-saw-station-digital-plan/ TOOLS & SUPPLIES: http://amzn.to/2xkEzOJ - Lego Shirt https://kit.com/iliketomakestuff/miter-saw-station https://kit.com/iliketomakestuff/my-woodworking-tools https://kit.com/iliketomakestuff/shop-safety-gear Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Просмотров: 602553 I Like To Make Stuff
Wood Lathe Bench
 
01:08
I own an old Reliant DD-70 Midi Wood Lathe and I purchased it new, back in 1993. It hasn't been used in many years and just sat in storage, collecting dust. With a renewed interest in wood turning, I dug it out, cleaned it up, but had no place to put it where I could operate it. This old wood lathe is very light (made in Taiwan) and has to be bolted down to something solid to reduce vibration. The solution was to design and fabricate a specialized lathe stand or bench that would be very heavy. The result is what you see in this video, using standard, kiln-dried, "2-by" framing lumber, a bunch of wood screws, and lots of wood glue. The paint was left-over stuff I found in the garage and I applied a couple of coats that left me with a surface much easier to clean dust off of. The height of the bench was dependent upon the height of the lathe spindle from the lathe bottom, and the height of my elbow from the ground when standing. This was done to facilitate a comfortable position for me whenever using the lathe. Please "Subscribe," "like," and "share." Please visit my website: http://www.downeastthunder.com where you can find free, downloadable, plans/drawings in pdf format for a variety of DIY projects. Also follow us on Facebook @DowneastThunderCreations and Twitter @DowneastThunder
Просмотров: 568 Downeast Thunder Creations
DIY Experimental Lathe From Scraps (FS Woodworking)
 
03:34
This is a video showing the process of assembling my diy lathe with the help of my dad. It cost 30 Euro only for the screws. All the materials were scraps in the workshop. We really enjoyed it! Hope you enjoy it too. An easy and cheap to make woodworking project video from FS Woodworking. Remember: Always use protective gear while working with wood and power tools. Safety first!! Enjoy the video! Το τραγούδι Whatdafunk του καλλιτέχνη Audionautix έχει άδεια με βάση το εξής: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/) Καλλιτέχνης: http://audionautix.com/ DISCLAIMER: My videos are showing the way I build stuff. If you think you are not feeling comfortable about working with wood or power tools then you should probably not try to make what I make. Although if you do please use safety gear.
Просмотров: 15046 Vasilis Papadopoulos
Building a lathe from scratch
 
09:00
Building a wood lathe from scratch, using wooden bearings and wooden pulleys. http://woodgears.ca/lathe/build.html plans for the lathe available here: http://woodgears.ca/lathe/plans/
Просмотров: 852759 Matthias Wandel
Mobile tool stands
 
10:24
Making two bandsaw stands and a stand for the pantorouter, http://woodgears.ca/tool_stand/stands.html I have been using this same design for most cabinets that I built since inventing the screw advance box joint jig.
Просмотров: 354063 Matthias Wandel
Building a strong workbench frame made of all 2x6 boards
 
05:57
This is a workbench frame I made of using only 2x6 boards, glue, and screws. The joinery used is fairly simple, but will hold the frame together for a long time. I did not make a top for this frame since this stand will be used for my lathe. The lathe already came mounted on an old steel desktop. I will bolt the steel top to the frame once the lathe refurbishment is completed. After the frame was completed, I added a coat of polyurethane for added protection. The void under the table will eventually be filled with drawers that I will make once some other projects are completed. You can also add doors and shelves if you like. Thanks for watching. Aaron Weed
Просмотров: 248791 Aaron Weed
Shopbuilt - Homemade wooden lathe
 
07:42
I recently upgraded my drill press and I thought this would be a good opportunity to build a lathe as a drill press has a lot of the needed components. This was an extremely fun woodworking project and seems to work really well for a homemade lathe. By Ryan nodwell Instagram: https://instagram.com/shop_built/ Music by: David Cutter Music www.davidcuttermusic.co.uk tweeter: https://twitter.com/nods221 facebook: https://www.facebook.com/pages/Shop-built/713921978645450
Просмотров: 296253 ShopBuilt
Lathe Stand Work Table(reupload)
 
09:09
I uploaded this before but my voice was horrible so I put music over it. I got tired of my lathe taking up my whole workbench so I made a separate stand for it. This was my first time trying to do tenons like that, they came out kinda poor but gets the job done.
Просмотров: 221 WoodWorkaholic
(how to make) a space saving flipping lathe cabinet
 
08:03
http://www.izzyswan.com/toolmasters Shop space is always on the slim for me so when I bought this lathe from bpway.com, through my Tool Masters Association I knew I was going to have to get creative about setting it up. So I built a cabinet that stores 3 tools and flipps. check it out Izzy's Tool Masters Association- http://www.izzyswan.com/toolmasters Discount tool purchasing Monthly Givaways Online Classes Private Facebook Group -Companies offering discounts through TMA - Bpway.com: Products- Fastcap,Rikon,Fien, and much more Sawblade.com Products: bandsaw blade, Circularsaw blades and metal working equipmant Acmetools: Products- brandname tools and much more Klingspor: Pruducts- Abrasives, handtools, and much more PrintedSolid: Products- 3d printer filiments and printers Arbortech: Products- Carving, sanding and shaping tools Industrial: Products- Metal legs for your woodworking projects Miterset: products- Make flawless miters easy with miter setting gauges Bell Forest: Products- Wood Supply company with thousands of options Conestaga: Product the only Lictenberg machine on the market Kaizan Insterts: Products - Custom Foam inserts for systainers IzzySwan.com: Products- free plans for life for founding member 50% off for everyone else -~-~~-~~~-~~-~- Please watch: "Extreme woodworking with limited tools | Izzy Swan" https://www.youtube.com/watch?v=eppMoEtGQPs -~-~~-~~~-~~-~-
Просмотров: 81488 izzy swan
Homemade lathe chuck  4claws for woodwork
 
06:12
something i wanted to try for some time now. a homemade lathe chuck that DOESN'T has dangerous points sticking out. most videos i've seen have bolts sticking out, s i tried to make it different. her is what i came up. unfortunatly "matthias wandel" made something similar and was just sooner than me. but still, have fun watching. VVVVV !There's more! VVVV *Toolmanufacturers and shops* can reach me via PM for proposals.(Only honest) also see my other projects: -tools: benchviseroller for circles and big bends: https://www.youtube.com/watch?v=b9PROiGKAXA -homedeco : a very nice tealightholder : https://www.youtube.com/watch?v=zbws-Di9nPk -tools: a very efficient anglegrindersander : https://www.youtube.com/watch?v=SFQLjLiE6SQ -tools: a strong press for crushing and bending : https://www.youtube.com/watch?v=kdptKYRPc5A -pets and garden: a doghouse : https://www.youtube.com/watch?v=-FZ0Iv8QdZU -Ebikehack: speed up your 25km/h bike : https://www.youtube.com/watch?v=ElTS-BVY3Vs -tools: a benchvise bendingtool : https://www.youtube.com/watch?v=FpOKZ49pyYM -homedeco: candlelight/drink coasters: https://www.youtube.com/watch?v=9_4xssGycpo -homedeco: coaster for stuff : https://www.youtube.com/watch?v=OEMRrDU_pN4 -pets: dogbrain toy: https://www.youtube.com/watch?v=kysdUhJCwXU -tools: carbidetooth knifesharpener: https://www.youtube.com/watch?v=KFCBH_rjkzk -addons: homemade wooden chuck: https://www.youtube.com/watch?v=JlNa2K7nOhI and so on... Subscribe for more interesting stuff. This only gets better and bigger!
Просмотров: 277681 Jörgen Börg
Make A Sturdy Lathe Cart For Beginner Woodworkers
 
08:16
Discover how to make a sturdy lathe cart for beginner woodworkers. There are projects that are simple to make and there are some that are difficult to make, but either way they can be designed by anyone who has the passion for them... If you want to started with woodworking today and create professional wood crafts, 'Rogue Oranum' through his ebook has helped many folks in getting started with professional woodworking, check out: http://www.online-ebook-review.com/2017/03/08/woodworking-beginners-rogue-oranum-review/ And don't forget to subscribe to our channel if you haven't yet: https://www.youtube.com/channel/UC7MhsUf6w4ZibRwFJRJbE7A Stay connected: - Connect on Facebook, Like our page: https://www.facebook.com/Woodworking-For-Beginners-686913431355619/ - Connect on Twitter, Follow us: https://twitter.com/yourwoodworker - Connect on G+, Follow us: Also Watch = Homemade Woodworking Tools: https://www.youtube.com/watch?v=vX_y7zXlICw Search Terms: make a sturdy lathe cart for beginner woodworkers, wooden lathe stand plans, midi lathe stand plans, homemade mini lathe stand, lathe stand plans free, mini metal lathe stand, diy lathe stand, mini lathe stand plans
Просмотров: 60 Professional Woodworkers
Lathe Bench
 
07:40
Today I'll be making a bench for my lathe. I'll be using material from an old bench I had and some new wood as well. ================================================== If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day! ================================================= DISCLAIMER READ THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You. ================================================== If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below). Facebook : https://www.facebook.com/MakeTheFirstCut You can also find me on: Google+ : https://plus.google.com/u/0/109459687839566728278/posts/p/pub Email: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music: (All music is taken from the YouTube audio library) “Run” by Ethan Meixsell “Get There” by Silent Partner “Hiking” by Silent Partner “Never Better” by Jingle Punks “Hitting The Streets” by JR Tundra
Просмотров: 1312 Chris Cute
Building a Lathe Stand
 
13:21
http://www.cncsidewinder.com Twitter: https://twitter.com/DaveGatton
Просмотров: 9236 Dave Gatton
Atlas Lathe Stand DIY Build Part 2
 
05:13
Welcome to part 2 where I turn this 4” ¼” wall steel tubing and 3/8" plate scrap into a lathe stand for my Atlas Quick Change 54 Lathe that I received for free
Просмотров: 270 Rivers Company
How to Build a Table Saw Lathe (Tenoner / Dowel Maker)
 
10:21
I used half a sheet of 3/4 plywood to create this table saw lathe. I will be mostly using it to round out stock and create spindles. It can be used as a tenoner and dowel maker as well. I have a free set of plans available on my website (link below). Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds
Просмотров: 501086 DIY Builds
lathe bench plans.mp4
 
00:41
Log on to woodworkingandyou.com for more details. Do subscribe the blog to get some free scoops .There are thousands of COMPILATION of woodworking plans all under one roof, so you don't have to waste time searching it it the borderless fiber optics.Thank you for your precious time.Have a nice day folks...
Просмотров: 344 woodworkingandyou
Build a Simple 2x4 Workbench
 
06:56
Go to http://lynda.com/april to get a free 10 day trial! A big thanks to Nick Ferry for doing the special effect at the end. ; ) For a written tutorial check out my blog at http://wilkerdos.com/2015/12/building-a-2x4-workbench/ My dad really needed a workbench for his garage and asked if it was something I wanted to build. : ) Of course I said yes. So here I show you how to build a very simple but sturdy eight foot workbench out of only 2x4s and plywood. I added pegboard only at the top because my dad wanted to have a space where he could reach the workbench surface from either side. However, you could very easily add a full sheet of pegboard instead and have it go all the way down to the workbench surface. Don't forget I have a set of plans, where I walk you through step by step, on my website if you want to build one! Follow me on Facebook at https://www.facebook.com/wilkerdos Patreon: https://www.patreon.com/user?u=257047 Instagram: https://www.instagram.com/wilker_dos/ Check out my awesome sponsor Triton Tools: http://www.tritontools.com/en-US Things I used: Circular Saw: http://goo.gl/SuokPY SuperJaws: http://goo.gl/xI6hnd Drill and Impact: http://goo.gl/cyoVeh Glue Bottle: http://goo.gl/8RTQdP
Просмотров: 1271906 April Wilkerson
4 in 1 Drill Press Build Pt1 : The Drill Press  /  4 in 1 Sütun Matkap 1. Bölüm
 
18:15
Part 1 of the 4 in 1 Drill Press: making the drill press. You can find all the measurements at the end of the video. For the other parts of the ''4 in 1 Drill Press'' visit my channel or click to links below: 4 in 1 Drill Press Build Pt2: Disc Sander & Lathe https://www.youtube.com/watch?v=zlLby5FvXW8 4 in 1 Drill Press Pt3 : Thickness Sander https://www.youtube.com/watch?v=uPL7oiQ9ZvA 4 Fonksiyonlu Sütun Matkap'ın 1. bölümü, sütun matkapın yapımı. Ölçülerini videonun sonunda bulabilirsiniz. Diğer bölümlerin videoları için kanalımı ziyaret edebilir veya aşağıdaki linklere tıklayabilirsiniz. 4 in 1 Sütun Matkap 2. Bölüm https://www.youtube.com/watch?v=zlLby5FvXW8 4 in 1 Sütun Matkap 3. Bölüm https://www.youtube.com/watch?v=uPL7oiQ9ZvA
Просмотров: 4697302 Gökmen ALTUNTAŞ
How to Make a Wood Lathe From Scratch - Motor and Tailstock
 
09:04
In this video I am finishing the lathe. Part 1: https://www.youtube.com/watch?v=QwGQZxmjwQM&t=8s Part 2: https://www.youtube.com/watch?v=r7qJ1cLgNUc Lathe playlist: https://www.youtube.com/playlist?list=PLiBJ_D3_ZSgJp9JyQQMkXQJxZk469IgBt Please consider supporting me on Patreon for early access to videos and to help keep quality content like this coming: https://www.patreon.com/TheArtOfWeapons?ty=h Check out my instagram for more updates: https://www.instagram.com/theartofweapons/ All music was used with permission from the creator and is royalty free.
Просмотров: 61903 TAOW
Portable Lathe Stand
 
11:12
I found a bathroom cabinet that worked out great for a portable lathe stand. I'm going to be demonstrating at the Oregon Woodturing Symposium March 6,7,8th. I'd love to have you stop by if you're in the area. Photos for Capt. Eddie send to Mark Baid at mbaid1224@gmail.com Oregon Woodturing Symposium http://oregonwoodturningsymposium.com/ I upload a new project video every Friday. Thank you for supporting free woodworking ======================== Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking=carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google+ https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref=hl Welcome to my channel, I started woodworking with my grandfather as a young boy. I continued woodworking through high school, and started woodturning after seeing a turned project in a friends shop. Shortly after YouTube started, I was looking for a howto video for duck calls, with no results I decided to make my own video. Some of my fondest memories are working with my grandfather in his wood shop. Being able to share our passion for woodworking, ties it all together. -~-~~-~~~-~~-~- Please watch: "Wood Turning" https://www.youtube.com/watch?v=ig3HuD2qcds -~-~~-~~~-~~-~-
Просмотров: 18906 Carl Jacobson
How to Make a Wood Lathe From Scratch - The Headstock
 
10:23
In this video I am making the headstock of my homemade wood lathe. Part one: https://www.youtube.com/watch?v=QwGQZxmjwQM&t=8s Part 3: https://www.youtube.com/watch?v=WU2OVpaBajg&t=302s Please consider supporting me on Patreon for early access to videos and to help keep quality content like this coming: https://www.patreon.com/TheArtOfWeapons?ty=h Check out my instagram for more updates: https://www.instagram.com/theartofweapons/ All music was used with permission from the creator and is royalty free.
Просмотров: 35213 TAOW
Flip Top Bench Build. Small shop solutions.
 
10:27
A great way to store large tools in a small shop, that also looks great.
Просмотров: 130484 Goose
DIY Miter Saw Stand
 
02:32
Buy the Plans here: http://bit.ly/2pwceVy Facebook: https://www.facebook.com/wilkerdos Instagram: https://www.instagram.com/wilker_dos/ Website: http://wilkerdos.com/product/miter-saw-stand-plans/ Patreon: https://www.patreon.com/user?u=257047 Check out my awesome sponsor Triton Tools!:http://www.tritontools.com/en-US Curious about things I use in my shop? Check it out!: https://www.wilkerdos.com/things-i-use/ In this short video I give you a walk around on how I built this DIY Miter Saw Stand. This is a perfect DIY project for the organizing the shop.
Просмотров: 407437 April Wilkerson
Atlas Lathe Stand Build, Part 1
 
11:00
Welcome to part 1 of this 2-part series where I turn this 4” ¼” wall steel tubing scrap into a lathe stand for my Atlas Quick Change 54 Lathe that I received for free. In this picture, you will note that it was bolted to a folding table and the bird poop was also included for free. The first step was to cut 28” pieces into 14” pieces. I split them in half at 30 degrees for the top of each leg. I then cut the bottom of each leg at 15 degrees. This goofy yellow angle/measuring contraption actually came in kind of handy, I set an angle of 150 degrees at 8” and 25/32, this would give me the intersection of the 2 legs when they’re standing on the ground. Here I’m setting up a jig to weld the 2 legs together. So, I turn on my welder and all of the sudden my camera decides to quit. So here I’m cutting the uprights for each leg, and they were 24” long with a 45 from center. Here I’m cutting 3” flat bar at 4” for the pads of each foot. I tacked the 4 pieces of flat bar together to allow me to drill just 1 hole. Here you will see me welding ½-13 nuts to each of those flat bar pieces to accommodate an adjustable foot There you can the adjustable foot with a rubber pad on it and I began to weld the flat bar pieces to the legs Now that the foots pads are welded in place, I weld the uprights for each leg. Fit up was fairly poor considering I was using a chop saw, so I wanted to clamp it all together to make sure I had everything lined up. And the last step for part 1 will be welding this 41” crossmember in between the legs. Thanks for watching part 1, in part 2 I will be adding the mounting plate and motor mount. Don’t forget to Like, Subscribe and Comment!
Просмотров: 455 Rivers Company
Table Saw Lathe Upgrade
 
03:32
I added a few improvements to my table saw lathe that help out with functionality and dust collection capabilities. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds
Просмотров: 13786 DIY Builds
Homemade Wooden Lifting Table
 
32:16
Support me here: https://www.patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist:https://www.amazon.de/gp/registry/wishlist/2CHXL814961N7/ref=nav_wishlist_lists_2 Follow me on Instagram: https://instagram.com/marius.hornberger/ Probably the coolest project I've built so far. It has already proven to be useful in- and outside the shop. Also the first time I could use the metal lathe. By the way, this was no cheap project. All materials together cost about 200€, but still totally worth the investment! Link to the metal hardware: http://cncshop.at/index.php?s=3 Enjoy the video!
Просмотров: 1826446 Marius Hornberger
Flip Top Tool Stand for Planer & Spindle Sander | DIY Woodworking Storage
 
03:06
This Flip Top Tool Stand is the perfect station for your planer, sander, miter saw, or any other benchtop tool. Shop workstations should serve double duty and this one does! Blog & Plans: http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/ __________ SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 __________ I'd love your support on Patreon! https://www.patreon.com/fixthisbuildthat __________ FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht __________ Music: http://www.bensound.com
Просмотров: 79058 Fix This Build That
NickyP Wood Shop Creations - Wood Lathe Stand
 
02:31
https://www.youtube.com/user/nicknono100 A stand for wood lathe with organization in mind (HIT SHOW MORE BELOW) If you have questions regarding any of my project please feel free to talk to me at: "NickyP Work Shop" https://twitter.com/VegasNickyP "NickyP" http://lumberjocks.com/NickyP "Nick Piccinonno" https://www.facebook.com/profile.php?id=100008159626220
Просмотров: 1086 Nick Piccinonno
HomeMade Bowl Lathe - Compilation (torno casero)
 
26:08
this is a short (just kidding its quite long) video of my home built bowl lathe. i made this video because over the past year i have received a huge amount of requests for information on the lathe, its construction, specifications and plans. i built the lathe from sketches based on the components i could find at a reasonable expense. this is my third home built lathe and definitely the heaviest duty. if you have any questions pleas put them in the comments and i WILL get to them.
Просмотров: 12868 Ray MAKES
DIY Rolling Drill Press Stand
 
02:25
A full step by step is posted on my written tutorial here: http://wilkerdos.com/2014/02/diy-rolling-drill-press-stand/ For a similiar set of plans click here: http://wilkerdos.com/product/mobile-shop-stand-plans/ I was sick of having to lift my drill press up from the floor to a work bench every time I wanted to use it, so I spent a few hours and made a dedicated stand for it. Follow and support me here: Facebook at https://www.facebook.com/wilkerdos Instagram: https://www.instagram.com/wilker_dos/ Patreon: https://www.patreon.com/user?u=257047 Website: https://www.wilkerdos.com/
Просмотров: 251266 April Wilkerson
lathe bench build - construction part 1
 
06:12
this bench (I hope) will be used to hold my grizzly lathe. which is currently resting on a wood bench, which isn't sturdy so the lathe wobbles. I've placed wheels on bottom so the bench can be moved around the garage. There are 3/8 inch bolts on the bottom of the bench which will allow me to level the lathe. the steel is 3inch x 3inch angle. its come from a large building and was not required for the construction, so I convinced the owner I would remove it for free from his property as it was an eye sore. I don't remember how long it was but I needed to cut it into 4 lengths to fit on the back of my truck.
Просмотров: 5537 see imadeit
New Shop Build: Part 6 - How to Build a Rolling Workbench
 
13:01
In this video I build two rolling workbenches that can be used as assembly tables, lathe tables, basic workbenches, or for rolling tool storage. These tables easily roll under other work benches to maximize space in your shop or garage. ORDER PLANS HERE: https://tommytompkins.com/product/tompkins-miter-saw-station-with-rolling-workbench
Просмотров: 404355 Tommy Tompkins